Can your floor be refinished?
Solid hardwood and engineered floors with enough wear layer can be sanded. Damaged or loose boards are repaired or replaced first, so the finished floor looks even.
Sanding
The floor is sanded in stages from coarse to fine, with edges and corners done separately. Dust control and careful vacuuming before coating keep the finish clean.

Stain colours
Natural, light neutral, brown, grey and dark tones are all possible on many species. Samples are tested on your floor, because the same stain looks different on different wood.
Finish and sheen
Water-based finishes stay clear and dry quickly. Oil-based finishes warm the colour. Matte and satin sheens hide scratches and dust better than gloss.

Living around the work
Rooms are closed off during sanding and coating. Light walking is usually possible after the final coat dries, and rugs and heavy furniture wait longer while the finish cures.
Common questions
How often should hardwood be refinished?
It depends on traffic. Many homes need a full refinish only every several years, with a recoat in between.
Can engineered hardwood be refinished?
Yes, if the wear layer is thick enough. Very thin wear layers can only be recoated.
Will refinishing remove deep stains?
Some deep pet or water stains go into the wood and may need board replacement.
Planning this for your home?
Send your city, rough measurements and a few photos. We will tell you which method suits your floor or stairs and give you an estimate after a visit.



